Section 2
o
External alarm relay wiring
The relay wiring is used for connecting the alarm to an
external security system. Wires are connected by inserting
them into the upper slots of the connector as seen in figure
2-2. They can be removed by pressing a small flat blade
screwdriver into the bottom slot that corresponds with the
wire needing to be removed see figure 2-2.
Figure 2-2
-5-
Section 3
Optional accessories
o
Strobe
The strobe is used as a visual indication of the alarm
being activated. The strobe is powered by the alarm
and only requires to be connection to the right side
of the alarm see figure 3-1. When the alarm is in
the off position the strobe will still activate when
the door is open. The strobe can be purchased at the
same time as the alarm or added after.
Figure 3-1
Reed switch
The reed switch is used in place of the mechanical
switch. It activates the alarm when the magnetic field
is broken. This option is available at an additional cost.
-6-
Insert Wire Here
Press Here
N/O
N/C
COM
Strobe
