Table of Content
Section 1
o
Features
Alarm volume
Alarm settings
Mechanical door switch
External alarm connection
Low battery chirp
Section 2
o
Standard Features
Key Switch
Mechanical switch
External Alarm Relay Wiring
Choice of alarm activation options
Section 3
o
Optional Accessories
Strobe
Reed switch
Section 4
o
Alarm activation settings
1.
Alarm activates when door is opened, shuts off
when door is closed.
2.
Alarm activates when door is opened, shuts off
with key only.
3.
Activates for 30 seconds when door is opened.
4.
Activates for 3 minutes when door is opened.
Section 5
o
Battery
Standby
Full operation
Changing Battery
Section 6
o
Trouble Shooting Guide
-1-
Section 6
MMP MODEL 200900 ALARM SYSTEM
TROUBLE SHOOTING GUIDE
1)
KEYED SWITCH IS IN THE ( ON ) POSITION
2)
ALARM SWITCH ON FRONT OF ALARM IS
SWITCHED TO THE (ALARM) POSITION. SEE
PICTURE ON FRONT COVER.
3)
OPTION SWITCH 1 IS IN THE (DOWN) POSITION AND
2, 3, AND 4 ARE IN (UP) POSITION. PG. 7, SECTION 4,
OPTION 1.
4)
CHECK JACK PLUGS ARE PUSHED IN AND SECURE.
PG. 4, FIGURE 2-1.
5)
CHECK CONNECTION ON STROBE (IF SO FITTED )
THAT IT IS PUSHED IN AND SECURE. PG. 6 SECTION
3, FIGURE 3-1.
AT THIS POINT THE ALARM SHOULD SOUND WHEN DOOR
IS OPENED AND SHUT OFF WHEN DOOR IS CLOSED.
IF THE ALARM SOUNDS AS SOON AS THE KEYED SWITCH
IS TURNED TO THE (ON) POSITION WITH THE DOOR
CLOSED. FIRST CHECK #3 FROM ABOVE LIST. ALSO
CHECK TO SEE THAT THE RUBBER BUMPER IS MAKING
CONTACT WITH THE MECH. SWITCH. (THE RUBBER
BUMPER IS LOCATED ON THE INSIDE OF THE DOOR AND
SHOULD BE CENTERED IN THE RECTANGLE WERE MECH.
SWITCH MEETS THE DOOR IN THE CLOSED POSITION. )
IF THE ALARM DOES NOT SOUND WHEN DOOR IS OPENED.
CHECK ITEMS 1-5 IN THE ABOVE LIST AND ALSO TRY A
NEW BATTERY.
IF THESE INSTRUCTIONS DO NOT GET THE ALARM
OPERATING, PLEASE CONTACT YOUR DISTRIBUTOR.
-10-
