MMF VM30-H, Инструкция по эксплуатации, Страница: 42 / 58

13.5. Transmission to PC by a Terminal Program
The VM30-H transmits the stored data as formatted text. Therefore it is also possible to use a
terminal program for the display of measured data. The following example explains how to use
the program Termit which is available for downloading from:
http://www.compuphase.com/software_termite.htm
The shown procedure is very similar with other terminal programs.
Open “Settings” to make a new connection with the serial interface or USB/RS232 adapter.
Enter the used COM port number, the VM30-H baud rate (section 16.5.), 7 data bits, even
parity, 1 stop bit and no flow control (Figure 25).
Figure 25: Configuration of the terminal program for data import from VM30-H
Establish a connection by clicking the button left of “Settings”. Enter a character “#” in the line
at the lower edge of the window and press Enter for transmission. Now the data from the
VM30-H memory will be downloaded into the terminal window (Figure 26). The VM30-H must
be in normal measuring mode (no menu opened and no active logging).
37