9
3)
Delete all the feature code of Requester
Delete all the feature code of Requester means back to the original state of the enhancer
The delete process is as following:
After entering the third step of the above, press the button of RX for 4 seconds, if RX light
put out, it means delete successfully.
This device complies with Part 15 of the FCC Rules and RSS-210 of IC Rule. Operation
is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must acceptany interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
