7
5
）
Set automatic delete number time
a. On working mode, Press the “TAB/+” button on the host for 4 seconds without release,
then the host displays 15 SESC, means to set automatic delete number state.
b. After modify to suitable time, press “ENT” button means record successfully.
c. Press “DEL” button or wait for 20 seconds, you can exit from setting state.
VI Notes
a. The requester number can be set range from 01 to 99, or A0 to J9, but couldn’t be 00.
b. XX SET
。
When set requester number, at XX PUSH state, if you do not press
the button of requester within 5 seconds, then the host will back to XX SET
state.
c. no matter at which set state, if you do not press any key of the remote controller
within 20 seconds, then the host will withdraw setup state and back to working state.
d. If you set one requester to No.1, and you set it again to No.5. Then it will be No.5 in
this system.
e. When set host with remote controller, press “1, 2, 3, 4” any button, the host withdraw
setup state and back to working state.
VII Appendix
：
Letter display
A
：
b
：
C
：
d
：
E
：
F
：
G
：
H
：
