5
IV System parameter
Requester capability
199
Number restriction
01-99, or A0-J9
Coverage of the requester
100m (open air)
Requester frequency
433.500MHz
Requester transmit power
<30mW
Requester power supply (2610N3 /2610E3)
4.5V, 3 No.7 batteries/ 12V, 1 No. batteries
Host receiving sensitivity
-105DB
Host power reply
AC 220V/DC 12V
Decode time
1-2s
Requester antenna
inside
Host antenna
Inside
Code mode
Self study
V. Setup
Power on the host first, and all the numbers will be “8”. then the host will display
—HOST----
，
and then the volume grade. And then it comes to working mode, on which you
can set it.
1
）
Set requester number:
a. On working mode, Press the ENT button on the host for 4 seconds without release, then
the host displays 01 SET , which means it comes to set mode.
b. Now the screen displays 01 SET, the low digit-1 is flashing, means this place can be
modified to any figure from 0-9 by“ALT/-”button on host , “TAB/+” button can change
the flashing digit. E.g., move to high digit, you can modify it to any figure from 0-9 and
any letter from A-J by“ALT/-” button. Its total capacity is 199 numbers.
c. After modifying number to what you want, e.g. 16 SET, press “ENT” button, then the
screen displays 16 PUSH, prompt you to press button of the requester.
d. Press the button of the requester within 5 seconds; the screen will display 16 OK,
