MPB
Description
Stable indicator. Ensure it stable indicator is on before pressing
tare, sample,
percentage, or accumulation.
Low battery; charge immediately.
Tare indicator when in net weight mode.
Zero indicator
3. OPERATION
3.1 Before use
To ensure that measurements are precise, turn on the scale 10 minutes prior to use.
Recalibrate the balance when the ing environment has been changed.
3.2 Zero the display
You can press the
ZERO
key at any time to set the zero point from which all other weighing
and counting is measured. This will usually only be necessary when the pan is empty. When
the zero point is obtained the zero indicator will show. The scale has an automatic re-zeroing
function to account for minor drifting or accumulation of material on the platform. If small
amounts of weight are shown when the platform is empty, press the
ZERO
key to re-zero
the scale.
3.3 Taring
Ensure the display shows zero, and that the zero indicator is on. If needed, press the
ZERO
key.
Place a container on the platform, its weight will be displayed.
Press the
TARE
key to tare the scale. The weight that was displayed is stored as the tare
value and that value is subtracted from the display, leaving zero on the display. The "TARE"
indicator will be on. As items are added only the weight of the product will be shown.
When the container is removed a negative value will be shown. If the scale was tared just
before removing the container this value is the gross weight of the container plus all product
that was removed. The zero indicator will also be on because the platform returns to the
condition it was when the
ZERO
key was last pressed.
3.4 Percentage weighing
The scale will show a sample weight as 100%. Any other weight placed on the scale after,
will be displayed as a percentage of the original.
sample. E.g. If a 350g object is placed on the scale and the
%
key is pressed the display will
show as 100.00%. If you remove the 350g weight and put a 300g weight on the scale the
display will show 85.71%, as 300g is 85.71% of 350g.
-2-
>0
<
>T
<