background image

• There must be enough cable below the luminaire to carry out maintenance work (see Fig. 3)

 

 

Fig. 2 

 

There must be enough cable below the luminaire to carry out maintenance work (see Fig. 3) 

 

 

Fig. 3 

 

With the Allen key provided, remove the hex screws fixing the bezel to the luminaire 

 

Remove the bezel, gasket and glass (see Fig. 4) 

 

 

Fig. 4 

 

Remove the screws around the top of the fitting and pull away from the plastic sleeve 

 

Feed appropriate cable through the compression glands at the base of the fitting 

 

Secure the sleeve (if required) into the mounting surface 

 

Connect the luminaire to the mains supply ensuring the correct polarity is observed L - Live (brown), E 

- Earth (green/yellow), N - Neutral (blue) 

Fig. 3

• With the Allen key provided, remove the hex screws fixing the bezel to the luminaire
• Remove the bezel, gasket, and glass (see Fig. 4)

 

 

Fig. 2 

 

There must be enough cable below the luminaire to carry out maintenance work (see Fig. 3) 

 

 

Fig. 3 

 

With the Allen key provided, remove the hex screws fixing the bezel to the luminaire 

 

Remove the bezel, gasket and glass (see Fig. 4) 

 

 

Fig. 4 

 

Remove the screws around the top of the fitting and pull away from the plastic sleeve 

 

Feed appropriate cable through the compression glands at the base of the fitting 

 

Secure the sleeve (if required) into the mounting surface 

 

Connect the luminaire to the mains supply ensuring the correct polarity is observed L - Live (brown), E 

- Earth (green/yellow), N - Neutral (blue) 

• Remove the screws around the top of the fitting and pull away from the 

plastic sleeve

• Feed appropriate cable through the compression glands at the base of the 

fitting

• Secure the sleeve (if required) into the mounting surface
• Connect the luminaire to the mains supply ensuring the correct polarity is 

observed L - Live (brown), E - Earth (green/yellow), N - Neutral (blue)

• Align the countersunk holes in the body of the fitting with the holes in the 

plastic sleeve

• Secure the luminaire into the sleeve using the screws provided

Fig. 4

Отзывы: