INSTALLATION
• Choose a suitable position for the outdoor socket outlet. It should be fixed to a rigid flat
surface as unevenness could cause damage to the product or affect operation
• Choose a suitable location close to the socket outlet to bring the supply cable through
the wall to inside the building
• Drill a suitable hole through the wall, ensuring not to infringe with any gas/water pipes
or electrical cables. The hole should slope very slightly down towards the outside in order
to prevent water ingress through the wall
• Remove the socket outlet front assembly from the backbox and carefully lift off the gasket.
Drill the required number of fixing holes in the backbox (see Fig. 1)
• Using the backbox as a template, mark the location for, and drill the fixing holes ensuring
not to infringe with any gas/water pipes or electrical cables
Fig. 1
