These instructions should be read carefully and retained after installation by the end user for
future reference and maintenance.
These instructions should be used to aid installation of the following products:
LED3xxx / LED5xxx / LED11xxx / LEDT3xxx / LEDT5xxx / LEDT11xxx
GENERAL INSTRUCTIONS
• This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671)
and current Building Regulations. If in any doubt, consult a qualified electrician
• Please isolate mains prior to installation or maintenance
• Check the total load on the circuit (including when this luminaire is fitted) does not exceed the rating of the
circuit cable, fuse, or circuit breaker
• Please note the IP (Ingress Protection) rating of this luminaire when deciding the location for installation
• This product is for indoor use only
• This product is Class III
• This product series is IP20 rated
• This product is dimmable with LEDDIMMER or LEDTD1* (*suitable for flat range only)
SAFETY
INSTALLATION
• Provide power to the required point of installation
• Using the clip as a template, mark the location for, and drill the fixing holes ensuring not to infringe with any
gas / water pipes or electrical cables and insert the luminaire into the clips until it locks into place. (see Fig. 1)
