INSTALLATION
Note - If this product is being used in conjunction with an external PIR or sensor, please
confirm with the manufacturer of the sensors that they are compatible with LED luminaires.
• Provide power to the required point of installation (refer to BS7671 for correct cabling
methods). Suitable IP rated junction boxes should be used where required
• Round cable should be used for the mains supply. The use of flat cable may cause water
ingress to the fitting
• Remove the outer frame and the LED gear tray from the luminaire housing (see Fig. 1)
Fig. 1
BL5xx INSTRUCTIONS_SPREADS.indd 5-8
BL5xx INSTRUCTIONS_SPREADS.indd 5-8
20/01/2021 16:02:41
20/01/2021 16:02:41
