SURFACE MOUNTING
• Secure the fitting to the surface with the wall plugs, screws, and rubber washers provided
• Drill two fixing holes in the rear of the luminaire housing, mark the location of the fixing
holes and drill ensuring not to infringe with any gas/water pipes or electrical cables
• Feed the mains cable through the grommet on either the rear or the side of the luminaire
housing (see Fig. 2) ensuring a good seal is made to retain the IP rating. The luminaire
can be fitted horizontally or vertically, enabling cable entry on either side
BL5xx INSTRUCTIONS_SPREADS.indd 5-8
BL5xx INSTRUCTIONS_SPREADS.indd 5-8
20/01/2021 16:02:41
20/01/2021 16:02:41
Fig. 2
