MKS Robin Nano, Руководство пользователя

Страница: 23 / 42

20
1. First click
“
Preheat
”
, the extrusion head and hot bed target temperature set (no hot bed can ignore the hot bed
target temperature).as Figure 1
2. When the temperature reaches the target temperature, click
“
homing
”
, choose to homing, so that the axes are
back to home point.(Attention:Model printing failure to select Breakpoints recovery the operation between the
Midway, if there is a power outage must be homing operation, such as continuous electricity can not return to home
point operation).as Figure 2
3. After the axis back to home points, move the z axis will touch the mouth to stop printing of the layer, such as
Figure 3, Figure 4, the time to test eyesight (can be selected in the configuration file to allow error, the following
figure
4 .Point setting, click on the breakpoint recovery and select the file to be printed on the breakpoint recovery, as
shown in Figure 5, figure 6.
5 . After you select the file, wait for it to print.as Figure 7.
(After selecting the model, the larger the model, the more complex it is, the longer it waits here.)
The steps of breakpoints recovery:
Ⅷ
. The network printing function
MKS Robin nano uses the network printing features, just add the Robin wifi module, wifi configuration in the
configuration file, and then use the Mkscould mobile phone app to connect the WiFi module, it can be printed
through the app control machine.
8.1 The introduction of printing mode