Document No 50398-001 Rev F 02 Aug 2020
15
of
20
15
of
20
5.
The beam is displayed in the BeamWatch software as an ellipse as shown in the images below. It may be necessary
to adjust the Exposure and/or Frame Summing to bring the alignment beam to a viewable level.
6.
If the beam is centered on the crosshair as shown in the properly centered example, the beam is aligned. If the
beam is not centered, adjust the angle the beam enters the BeamWatch. The following illustrations show beam
deviations and the resulting displays.
Note: The angle of the beam is exaggerated for clarity.
