MKS 651C, Инструкция по эксплуатации, Страница: 146 / 172

Command Reference Appendix F: Command and Request Reference
132
RS-232 Command Summary (Continued)
Command Function
T5 value
Set point E type where value is:
0 = position
1 = pressure
T6 value
Set point analog type where value is:
0 = position
1 = pressure
B value
Valve position output range where value is:
0 = 5 Volts
1 = 10 Volts
N value
Direct/reverse control where value is:
0 = direct
1 = reverse
U value
Sensor type where value is:
0 = Absolute
1 = Differential
X1 value
Set lead of set point A, where value = seconds
X2 value Set lead of set point B, where value = seconds
X3 value Set lead of set point C, where value = seconds
X4 value Set lead of set point D, where value = seconds
X5 value Set lead of set point E, where value = seconds
M1 value Set gain of set point A, where value = % gain
M2 value Set gain of set point B, where value = % gain
M3 value Set gain of set point C, where value = % gain
M4 value
Set gain of set point D, where value = % gain
M5 value
Set gain of set point E, where value = % gain
V0 Select Self-Tuning control
V1 Select PID control
Table 26: RS-232 Command Summary
(Continued on next page)