MKN Argentina 1, Руководство по эксплуатации

Страница: 22 / 32

Cleaning and caring for the unit
22 Operating instructions
6 Cleaning and caring for the unit
CAUTION
Risk of burns from hot surfaces
• Allow surfaces to cool prior to cleaning.
ATTENTION
Risk of physical damage from improper cleaning
• Do not clean the unit with a high-pressure cleaner or water
jet.
ATTENTION
Risk of physical damage through penetration of water
• Do not close the discharge channel and do not fill with water.
Image: Discharge channel
6.1 Preventing corrosion
• Keep the surfaces of the unit clean and with access to air.
• Remove lime, grease, starch and protein deposits.
• Only expose parts made from non-rusting steel to brief contact
with highly acidic foods, spices, salts or the like.
• Avoid damaging the stainless steel surface with other metal items,
for example steel spatulas or steel wire brushes.
• Prevent contact with iron and steel, for example steel wool and
steel spatulas.
• Do not use bleaching or chlorine-containing cleaning agents.
• Clean contact surfaces with water.
6.2 Eliminating rust spots
• Remove fresh rust spots with a mild abrasive or fine sandpaper.
• Always remove rust spots completely.
• Expose treated areas to fresh air for at least 24 hours. During this
time, do not allow any contact with greases, oils or foods so that a
new protective layer can form.
1001064120ABBE--