
Technical Documentation
ZRF-P 2040
mk North America, Inc.
|
105 Highland Park Drive
|
Bloomfi eld, CT 06002
|
(860) 769-5500
|
www.mknorthamerica.com
©2022
|
Page 24
mk North America, Inc.
|
105 Highland Park Drive
|
Bloomfi eld, CT 06002
|
(860) 769-5500
|
www.mknorthamerica.com
©2022
|
Page 25
Remove both cap nuts (1) and remove chain guard.
Loosen the motor mounting screws (1). Move the motor (2) in
the arrow direction to tension the drive chain (3).
Do not over-tension the drive chain!
Proper chain tension should allow 2-10 mm of play on one side.
Drive Chain Lubrication
The drive chain (1) must be lubricated with grease in
accordance with the maintenance instructions (See Section 6).
Apply the lubricant with a brush to the chain edges, in order for
the lubricant to penetrate the links completely.
9
CONVEYOR MAINTENANCE - TENSIONING & GREASING OF DRIVE CHAIN
9.1 ZRF-P 2040 AC
21
9.2
ZRF-P 2040 AS
22
Do NOT lubricate timing belt and pulley drive trains.
9
CONVEYOR MAINTENANCE - TENSIONING & GREASING OF DRIVE CHAIN (CONT.)
9.1
Tensioning & Greasing of the Drive Chain - ZRF-P 2040 AC
Note: Reassemble in reverse order; ensuring all screws are tight and all guards are in place before
operating.
1
3
1
1
2
2-10 mm
All work to be performed by qualifi ed personnel only.
Conveyor power must be disconnected before performing maintenance.