mk North America, Inc.
|
105-125 Highland Park Drive
|
Bloomfi eld, CT 06002
|
860.769.5500
|
www.mknorthamerica.com
©2017
|
Page 29
9
CONVEYOR MAINTENANCE - TENSIONING & GREASING OF DRIVE CHAIN (CONT.)
9.3
Tensioning & Greasing of the Drive Chain - ZRF-P 2010 BC
Note: Reassemble in reverse order; ensuring all screws are tight and all guards are in place
before operating.
Remove the drive train cover bolts (1) (various places) and
remove the drive train cover (2).
Loosen the motor mounting screws (1) - 4 places.
Slide the motor (2) in the slots provided in the direction of
the arrow, thereby adding tension to the drive chain (3).
Do not over tension the drive chain. Proper tension should
allow 2 to 6 mm of chain movement on the side.
Greasing the Drive Train
The drive chain (1) must be lubricated with grease in
accordance with the maintenance instructions (See Section 6).
Apply the lubricant with a brush to the chain edges, in order
for the lubricant to penetrate the links completely.
