mk North America, Inc.
|
105-125 Highland Park Drive
|
Bloomfi eld, CT 06002
|
860.769.5500
|
www.mknorthamerica.com
©2017
|
Page 27
9
CONVEYOR MAINTENANCE - TENSIONING & GREASING OF DRIVE CHAIN
9.1
Tensioning & Greasing of the Drive Chain - ZRF-P 2010 AC
Note: Reassemble in reverse order; ensuring all screws are tight and all guards are in place
before operating.
Remove cap nuts (1) and remove chain guard (2).
Loosen the motor mounting screws (1) - 4 places.
Lower the motor (2), thereby adding tension to the drive
chain (3).
Do not over tension the drive chain. Proper tension should
allow 2 to 6 mm of chain movement on the side.
Greasing the Drive Train
The drive chain (1) must be lubricated with grease in
accordance with the maintenance instructions (See Section 6).
Apply the lubricant with a brush to the chain edges, in order
for the lubricant to penetrate the links completely.
