18
Water Pump Setup for Operation:
The Water Pump can be setup for operation in two ways, External Water Source or Re-circulation.
NOTE: If using a dry blade for operation, DO NOT connect the water pump.
SETUP, ADJUSTMENT AND OPERATION
(B)
Place Water Pump in Water Pan.
Fill the Water Basin until water
completely covers the
Water Pump suction.
(A)
Remove the Drain Plug. Place
empty container under hole for
water drainage.
(B)
Place the Water Pump in an
H[WHUQDOFRQWDLQHUDQGÀOOXQWLO
water completely covers the
Water Pump suction.
External Water Source:
This is the preferred method of cooling.
Re-circulation:
NOTE: When using the re-circulation method, the water should be changed often for longer pump life
(A)
Ensure the Drain Plug is
installed in the Water Basin.
