MK Welding Multi-GMAW 200 LCD PFC, Руководство пользователя

Страница: 74 / 104

OPERATION
43
EN
§4.2.2 Operation of the Stick welding method
1. Selection of the welding method:
1) In the main interface, press the MENU key to enter the function selection interface;
2) In the function selection interface, rotate L Knob to select the Stick welding method and press it
for confirmation. Refer to Fig. 1;
2. Selection and setting of welding parameters:
1) In the main interface, press the MENU key to enter the welding parameter setting interface;
2) In the welding parameter setting interface, rotate L Knob to select the parameter as required and
rotate R Knob to set a value for the parameter, afterwards, press L Knob or R Knob for confirmation
as shown below:
Welding parameters
available by rotating L
Knob
Welding parameters
available by rotating R
Knob
Hot Start 0-10
Arc Force 0-10
3. Setting of welding voltage:
1) Press the ENTER key to enter the welding interface shown below:
2) In the welding interface, rotate L Knob to set the welding current, and then press it for confirmation;
§4.2.3 Stick
（
MMA
）
Welding