MK Products COBRAMIG 300, Руководство пользователя, Страница: 16 / 36

CobraMig
® 300
Owner's Manual -
Page 10
Display Settings
There are 3 operational values on your CobraMig 300 User Interface.
Heat : Is a reference value from 0-10, which controls the voltage output,
(Actual voltage will display during welding)
Wire Speed : Wire speed displayed is from 0-800 (Displays in inches/ minute)
Memory : 1-8 User memories available
Press
‘SELECT’ button
either on the gun or front display to switch between
operational settings.
The
LED light
will illuminate which setting is active.
Use adjustment knob or the
( + )
or
( - )
Button on the gun to adjust the
value up or down.
Section B
On/Off
switch
Adjustment
Knob
Select
Button
Wire Speed/
AMPS
Display
Memory
Display
Heat/ Volts
Display
Note: Once arc is established during welding, actual welding Voltage and
Amps will be live and displayed on the user interface. After welding, actual
Volts and Amps will remain displayed for three seconds before resetting back
to Reference Voltage and Wire Speed. See example above.
~ All parameters are automatically saved per user memory~
(See advanced parameters S 04 for more details)