12
Attaching Stabilizer Arm to Cutter
Various attachment brackets are supplied with the Axis Tool bar to attach the Stabilizer Bar to
the cutter.
Cutter with a single Wheel Beam
Shown with Wheel Beam adjustment
bolt sharing stabilizer-bar bracket
Cutter with “A” Frame Wheel Bracket
Cutter with 90° Adjuster Plate
Customer may need to drill bolt hole to at-
tach stabilizer bar.
As required.
Cutter with flat 0° Adjuster Plate
Customer may need to drill bole hole to attach
stabilizer bar.
When attaching at bottom of plate as shown,
check to ensure that the gearbox has clearance.
