10
Operation Transport
1. Rotate the Axis Too Arm “A” Frame Cylinder to the collapsed position. [Fig #3]
2. Install Breakaway Lock pin to secure the deck in transport. [Fig # 1]
3. Raise Main Arm until Deck is in a vertical position. [Fig # 3]
4. Detach Cutter PTO Drive from Axis Tool Arm Gearbox
5. Remove top link pin from Stabilizer Bar and
carefully
swing the cutter toward the tractor [Fig
4,5,6]
6. Attach the Stabilizer Bar to opposite side of “A” Frame hitch [Fig # 6]
7. Insert PTO into Cradle Bracket [Fig #7]
8. Raise the Main Arm until cutter is positioned at rear of tractor. [Fig #8]
#1 Cylinder collapsed
#3 Main Beam
Vertical Deck
Front View
Top View
Top View
Top View
Stabilizer Arm
pinned in Trans-
port position
Fig #3
Fig # 4
Fig # 5
Fig # 6
