MK-370
Revision 06/05, Effective Date June 17, 2005
Page 14
UNPACKING, TRANSPORT, UNIVERSAL STAND and ASSEMBLY
4. Adjustable Cutting Guide Installation:
(F)
Verify the Directional Arrow of
the Blade faces outward and
matches the Directional Arrow
of the Blade Guard
(G)
Install the Retaining Nut and
Outer Flange; install the Shaft
Wrench and Blade Wrench as
shown in Steps C and D and
Tighten the Retaining Nut
(E)
Install Diamond Blade onto
Blade Shaft
(I)
Tighten the Blade Guard Pivot
Point Retaining Wingnut
(H)
Close the Blade Guard and
tighten the Blade Guard
Retaining Thumbscrew
Correct Direction
of Rotation
(D)
Place the Blade Wrench on the
Blade Retaining Nut and
remove the Blade Retaining
Nut and Outer Flange
Blade
Wrench
Diamond
Blade
Blade
Shaft
Turn counter-
clockwise to
loosen
Hold
steady
Retaining Nut
and Outer
Flange
Retaining Nut
and Outer
Flange
Retaining
Thumbscrew
Retaining
Wingnut
Rotate clockwise
to tighten
Turn clockwise
to tighten
Rotate clockwise
to tighten
(A)
Loosen Adjustable Cutting
Guide retaining thumbscrew and
place it over the Movable
Cutting Table Ruler/Stop
(B)
Place the Adjustable Cutting
Guide onto the Movable Cutting
Table Ruler/Stop and tighten
the retaining thumbscrew
Turn clockwise
to tighten
Ruler/Stop
Adjustable
Cutting Guide
Turn counter-
clockwise to loosen
Adjustable
Cutting Guide
