MK Diamond Products 157721WX, Руководство пользователя и список запасных частей

Страница: 19 / 44

19
BX-3 OPERATION
CAUTION
CAUTION
ON
( (
)
)
ON
( (
)
)
If an extension cord is used, first verify it meets the requirements on page
12. Plug the BX-3 into the extension cord; plug the extension cord into a
GFCI. Finally, plug the GFCI into the power source in that order.
DO NOT FORCE the blade to cut, it will do the job better and safer at rate
for which it was designed.
CUTTING SETUP
(A)
Inspect for damage.
(A)
Set edge of Cutting Guide to
desire cut length on Ruler/
Stop.
(A)
Plug GFCI into BX-3.
(B)
Inspect Motor Air Filter
for cleanliness.
(B)
Position masonry piece. Set
against Cutting Guide and
Ruler/Stop.
(B)
Plug GFCI into
Power Source.
(C)
Verify Trigger Switch is work-
ing. Push white button to lock.
Push trigger switch to unlock.
(C)
Attach waterhose. Turn Water
Valve on when preparing to cut.
(Wet Cutting Saw only)