MK Controls Lightning Bug, Инструкция по эксплуатации

Страница: 10 / 21

Rev: June 27, 2013 Page 10 of 21
Operation
Mounting the Lightning Bug
TM
on a Camera
First, make sure that both the Lightning Bug
TM
and your camera are powered off.
Attach the unit to your camera’s hot-shoe, and then install the shutter cable. You
can then power both units on – either can be turned on first.
Point your camera, and the let the Lightning Bug™ do the rest!
Basic User Controls
The Lightning Bug
™
has three ‘soft-touch’ buttons that are used to operate all of
the features:
On/Off
Decrease Sensitivity
Increase Sensitivity
On/Off - Press and hold this button for approximately 2 seconds to turn the
Lightning Bug™ on or off. When the unit is first turned on, it will execute a Power
On Self-Test (POST), which will light up all of the LED’s and perform an internal
function verification. If during the POST you notice that any LED’s fail to
illuminate, please contact MK Controls Technical Support for troubleshooting.
Decrease Sensitivity - Tap this button to decrease the sensitivity of the Lightning
Bug ™. When this button is pressed, the bargraph display (orange LED’s) will be
show the current sensitivity level. There are a total of 26 levels of available
sensitivity. The factory default setting is level 12.