5.10
V
ICTRON
I
NVERTER
/C
HARGER
Under normal circumstances there is no need for adjustment other than
switching the INVERTER on at the AC Panel and the toggle at the
PHOENIX CONTROL to on to invert 12v DC Battery power to 120V AC
power…or to
off
when 120V is sourced from SHORE POWER or
GENERATOR.
When off, it works in reverse when charging from a 120v source.
Charging
When
SHORE POWER
is connected t o a 1 2 0 v 30-amp shore
power supply or when the
GENERATOR
is on, the
INVERTER
charges the
HOUSE BATTERIES,
the
PORT
and
STBD ENGINE START BATTERIES, the
THRUSTER (Option) BATTERY
and the
GENERATOR
START BATTERY
.
Push
the toggle switch to off and the the Battery Charger Breaker on the 120V
PANEL to on.
Inverting
The 120V AC panel operates accessories that require 120V AC,
such as the
COOKTOP, MICROWAVE, TV,
and
OUTLET/RECEPTACLES
. To
activate the inverter function: DO NOT activate the WATER
HEATER and AIR CONDITIONING when investing. The loads are
too great.
1.
Turn on the switch at the
INVERTER/CHARGER
located over the
STARBOARD FUEL TANK
under the pilothouse settee.
2.
Push the toggle switch at the
DIGITAL MULTI CONTROL
to on. 120V
AC power will be supplied to the left side of the AC 120V panel.
Although
INVERTER/CHARGER
specifications claim it will
automatically shut off the inverting process if the battery voltage drops, it’s
unwise to count on it. If you leave the boat with the
DIGITAL MULTI
CONTROL
switched to
INVERTER
on, i
t may draw amperage even if no AC
device is turned on and discharge your batteries. When you leave the
boat, keep the
PHOENIX CONTROL
units switched to “
off”.
5.11
B
ONDING
The boat’s bonding system connects underwater metal fittings to the
sacrificial anode and the boat’s negative bus bar. For the anode to protect
an underwater part, the connection must be clean and secure. The green
wires that make up this system don’t normally carry current.
INVERTING STATUS
inverter on:
INVERTER is converting
12V DC to 120V AC for 120V loads on
the left side of the 120V breaker panel
and is draining the HOUSE BATTERIES.
overload:
Load on the INVERTER is
over 4000 amps.
low battery:
The
HOUSE BATTERY is
low. INVERTER won’t work.
temperature
HOUSE BATTERY
temperature is high.
Содержание 35z
Страница 1: ...35 z O W N E R S G U I D E ...