6
DMX Terminator:
In the Controller mode, at the last fixture in the chain, the DMX output has to be connected with a
DMX terminator. This prevents electrical noise from disturbing and corrupting the DMX control
signals.
The
DMX terminator is simply an XLR connector with a 120Ω (ohm) resistor connected across pins
2 and 3, which is then plugged into the output socket on the last projector in the chain. The
connections are illustrated below.
Function Set:
Touch Operation
Picture 1 picture 2
Touch LCD into the main menu, when the LCD is off.
When the LCD display the main menu,touch the menu into
sub menu
.(as picture 1)
Touch LCD display, can set the address code and function code easily.
Set or browse function setting of lamp, touch UP or DOWN buttons.
(as picture 2)
Touch
OK
key to save your changes, Touch
UP
or
DOWN
can change value(Plus or reduce
number).
According to the
Back
key to return to the last menu.
Up
Ok
Down
Back
Set Up
Manual
System
Advanced
180
中／ＥＮ
