Mizuho VACB-3006B, Руководство оператора

Страница: 58 / 62

54
Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed
and put into service according to the EMC information provided in this manual.
Portable and mobile RF communications equipment can affect Medical Electrical Equipment.
The use of accessories, transducers, and cables other than those specified, with the exception of
transducers and cables sold by the manufacturer of this device as replacement parts for internal
components, may result in increased emissions or decreased immunity of Operating Table VACB-
3006B.
Operating Table VACB-3006B should not be used adjacent to or stacked with other equipment.
if adjacent or stacked use is necessary, Operating Table VACB-3006B should be observed to verify
normal operation in the configuration in which it will be used.
GUIDANCE AND MANUFACTURER’S DECLARATION – ELECTROMAGNETIC EMISSIONS
Operating Table VACB-3006B is intended for use in the electromagnetic environment specified
below. The customer or the user of Operating Table VACB-3006B should assure that it is used in
such an environment.
Emissions test Compliance Electromagnetic environment – guidance
RF emissions CISPR 11 Group 1
Operating Table VACB-3006B uses RF energy only for
its internal function. Therefore, its RF emissions are
very low and are not likely to cause any interference in
nearby electronic equipment.
RF emissions CISPR 11 Class A
Operating Table VACB-3006B is suitable for use in all
establishments, other than domestic establishments and
those directly connected to the public low-voltage power
supply network that supplies buildings used for domestic
purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations /
flicker emissions IEC
61000-3-3
Complies
Appendix1 Electromagnetic compatibility