Mizuho VACB-3006B, Руководство оператора

Страница: 23 / 62

19
4
Operation
CAUTION
- Connect the power cord to a
power source with protective
grounding to prevent the risk
of an electric shock.
- Make sure to use the
dedicated power cord with
"MIZUHO" logo.
- Make sure that the connector
of the power source is not
wet and is not dusty before
plugging the power cord into
the connector of the power
source.
- Pull out the power cord from
the medical grade wall outlet
to cut the power supply
completely.
- If the battery deteriorates, it
will not be available for the
operating table when the AC
power is not supplied due to
power outage and etc.
NOTE
- When you first purchase the
product or have not used it
for long time, make sure to
charge the battery before use.
- Battery will get discharged
naturally even when the table
is not used. Make sure to
charge the battery before use.
- If the battery lamp on the
control unit flashes after using
the operating table or the
battery indicator on the lower
part of the operating table
shows empty (red) when
using, charge the battery
immediately.
■
Battery charging
2. During the battery charge, the battery indicator
of the operating table flashes yellow.
1. To start charging, insert the power cord into a
power connector and into a medical grade wall
outlet and turn on the power switch.
3. The battery indicator flashes yellow to green in
order when charging is completed.
medical grade wall outlet
power cord
connector of the
power source
Installation and battery charging
yellow
green
power switch