Mizuho MST-7300B, Руководство оператора, Страница: 85 / 94

81
10
Before contacting for repairs
Status Possible cause Measures
The lift of the operating
table cannot be
performed in the down
direction. The head plate almost comes in contact
with the floor, and a message appeared.
(No.2)
Perform the following operations.
• Reverse Trendelenburg (
à
Page 41)
• Back plate bending: Up(
à
Page 43)
The seat plate almost comes in contact
with the base, and a message appeared.
(No.3) Perform the following operations in the
return direction.
• Lateral tilt (
à
Page 40)
• Trendelenburg (
à
Page 41, 42)
The leg plate almost comes in contact
with the lift linkage, and a message
appeared. (No.4) Bend the leg plate of the operating table
upward. (
à
Page 45)
There is something below the lift linkage.
(No.14) Remove the object. (
à
Page 46)
The lift linkage almost comes in contact
with the Trendelenburg frame, and a
message appeared. (No.15) Trendelenburg the operating table in the
head down direction. (
à
Page 42)
The Trendelenburg
of the operating table
cannot be performed
in the head down
direction. The head plate almost comes in contact
with the floor, and a message appeared.
(No.2)
Perform the following operations.
• Back plate bending: Up(
à
Page 43)
• Table up (
à
Page 46)
The seat plate almost comes in contact
with the base, and a message appeared.
(No.3) Perform the following operations.
• Lateral lift in the return direction
(
à
Page 40)
• Table up (
à
Page 46)
The Reverse
Trendelenburg of the
operating table cannot
be performed in the
head up direction. The seat plate almost comes in contact
with the base, and a message appeared.
(No.3) Perform the following operations.
• Lateral lift in the return direction
(
à
Page 40)
• Table up (
à
Page 46)
The leg plate almost comes in contact
with the lift linkage, and a message
appeared. (No.4) Bend the leg plate of the operating table
upward. (
à
Page 45)
The lift linkage almost comes in contact
with the Trendelenburg frame, and a
message appeared. (No.15) Lift the operating table. (
à
Page 46)
The lateral tilt of the
operating table cannot
be performed in the
right down direction. The head plate almost comes in contact
with the floor, and a message appeared.
(No.2)
Perform the following operations.
• Reverse Trendelenburg (
à
Page 41)
• Back plate bending: Up(
à
Page 43)
• Table up (
à
Page 46)
The seat plate almost comes in contact
with the base, and a message appeared.
(No.3) Perform the following operations.
• Trendelenburg in the return direction
(
à
Page 41, 42)
• Table up (
à
Page 46)
The leg plate almost comes in contact
with the lift linkage, and a message
appeared. (No.4) Bend the leg plate of the operating table
upward. (
à
Page 45)
The slide rail almost comes in contact
with the lift cover, and a message
appeared. (No.20) Perform the Trendelenburg operation for
the operating table to the level position
or in the head down direction from the
level position.
(
à
Page 42)