Mizuho MOT-VS600 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 78

background image

3

1

Introduction

This Manual is intended to support safe and effective operation of the operating table.
Read this Manual carefully and familiarize yourself thoroughly with its contents (operation,
inspection, adjustment, servicing) before operating the table.
Using the table without following the instructions contained in this Manual may cause a serious
accident.

Safety information in this Manual and on the labels attached to the table is given in the following
forms for easy and full understanding:

Introduction

WARNING

CAUTION

NOTE

A WARNING notice indicates a situation which can result

in death or serious injury to a person if the notice is

ignored and the table is handled improperly.

A CAUTION notice indicates a situation which can result

in injury to a person and/or damage to property if the

notice is ignored and the table is handled improperly.

Description under this heading gives supplementary

explanation of the functions of the table.

The WARNING and CAUTION notices in this Manual relating to the operation, inspection,
adjustment, or servicing of the table apply in using the table for surgical procedures.
The user is solely responsible for safety if the table is operated, inspected, adjusted, or serviced in
a way not specified in this Manual.

This product is designed to support patients during surgical procedures.
This product has functions to adjust the height of the tabletop and to change a patient's body
position.
Both a medical grade AC power and a battery are available as a power source.
This product is to be used by health care professionals, including but not limited to surgeons,
nurses and biomedical technicians.

About this product

«
...
5
6
7
8
9
...
»

Содержание MOT-VS600















































































Отзывы:

Нет отзывов

Похожие инструкции для MOT-VS600

Бренд: NEILPRYDE Страницы: 53

Бренд: JAC Страницы: 103

Бренд: 3Disc Страницы: 12

Бренд: Jaga Страницы: 32

Бренд: JB-Lighting Страницы: 32

Бренд: W&H Страницы: 72

Synthesis SDEC-3000

Бренд: JBL Страницы: 24

Бренд: Xilica Audio Design Страницы: 30

Бренд: Mackie Страницы: 34

Бренд: Mackworth Страницы: 38

Бренд: P&P Страницы: 6

Бренд: UNIS Страницы: 16

Bathomatic Basic

Бренд: Unique Automation Страницы: 10

Бренд: Additel Страницы: 139

Бренд: mychway Страницы: 56

SeQual Eclipse 5

Бренд: CAIRE Страницы: 2

Бренд: WAGNER Страницы: 31

Бренд: Iwatsu Страницы: 234

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды