manualshive.com logo in svg

Miyachi 500DP, Руководство пользователя, Страница: 76 / 93

Поделиться
Скачать
Miyachi 500DP Скачать руководство пользователя страница 76

APPENDIX A: TECHNICAL SPECIFICATIONS 

 

875DP/500DP/500HV DUAL PULSE 

RESISTANCE WELDING POWER SUPPLIES

 

990-290 

A-13 

x

Switch the valve driver to ON, which causes the upper electrode of the weld head to apply force, as 
determined by the air regulator connected to the top of the air cylinder on the weld head, to the 
workpiece. 
 

x

Start the squeeze period. 

 

The 2nd Level initiates the start of the Weld Period, provided that the Force Firing Switch has closed 

and

 the Squeeze Period has ended.  A 1-Level Footswitch combines the functions of both levels of a 2-

Level Footswitch. 

 

 
Chain Schedules Feature 

 

The chain schedules feature is used to automatically change the weld schedule in use to another specified 
schedule.  Chain schedules is a system feature, and is turned ON using the options menu. 
 
When chain schedules is turned ON, the RUN screen and PROGRAM screen for each schedule will have 
additional fields for both STEP COUNT and NEXT SCHEDULE.  STEP COUNT and NEXT SCHEDULE 
are used to chain schedules together. 
 

 

Step Count 

 

STEP COUNT is a weld counter which counts down to 0.  Any number from 00001 to 99999 can be 
entered as a step count.  When the step count reaches 0, the schedule will change as specified by the 
NEXT SCHEDULE.  If a weld sequence is not completed and/or the WELD/NO WELD switch is set to 
NO WELD, the step counter will 

not

 count down. 

 
 

Next Schedule 

 

NEXT SCHEDULE is the number of the weld schedule to be used when the step count reaches zero.  
Any schedule number from 001 to 015 can be used and any number of schedules can be chained 
together, with some exceptions as follows: 
 

••

Next Schedule = 0:  Can only be used at the beginning of a chain. 

•• • •

Next Schedule = Current Schedule: Prevents chaining.  When the step count reaches 0, it will reset 
and the current schedule will remain in use. 

•• • •

Next Schedule = [ . ] period:  Causes the power supply to stop after the step count has reached 0 and 
issue a standby stop command alarm. 

•• • •

Weld Function = Rollspot:  Can only be used as the last schedule in a chain. 

 

Содержание 500DP






























































































Отзывы:

Нет отзывов