2
About this module
Technical data
* Tested at 80 C, 15 L/min primary flow as per BS EN 12897-2016
** Equivalently performant coil surface area for SAP 10 calculations
Exchanger construction
Copper brazed 304 SS
Exchanger rating*
44 kW
Exchanger max. primary flow rate
65 L/min (3.8 m
3
/hr)
Exchanger connections
3/4” ISO-G (BSPP) M
Exchanger max. primary flow temperature
80 °C
Exchanger max. working pressure (indirect)
2.0 MPa (20 bar)
Circulator pump rating
230-240 V~ 10-50 W
Exchanger equivalent coil surface area**
3 m
2
The Mixergy heat pump exchanger module is designed to allow
for integration of any Mixergy cylinder with both low and high
temperature heat pumps.
This module incorporates a high surface area plate heat exchanger
and circulator pump to enable high performance heat transfer
between the heat pump and cylinder. This module replaces a
traditional coil and can provide better volumetric efficiency,
reheat speed, heat pump performance and serviceability than a
conventional system.
For all queries, please contact us:
Tel: 01865 884343
Email: [email protected]
