Mitutoyo DP-1VA LOGGER, Руководство пользователя

Страница: 30 / 99

14
2 Basic Operations
No. 99MAM029A
2.1.5 Connection of a Measuring Instrument with Digimatic
Output
Connect the Digimatic connection cable (option) to the product according to the following
procedure.
1
Prepare.
Prepare the measuring instrument with Digimatic output to connect and the Digimatic
connection cable.
For further details on the Digimatic connection cable, refer to "7.4.1 Digimatic Con-
nection Cable List" on page 79.
2
Check the power.
Check whether the power of the product is off.
3
Connect the Digimatic connection cable.
Connect one of the connectors of the Digimatic connection cable to the input connector
(INPUT) on the right side of the product, and connect another one to the output connector
of the measuring instrument with the Digimatic output side.
INPUT
OUTPUT
DAT
A
IN
OUT
Input connector (INPUT)
Measuring instrument with Digimatic output
Digimatic Caliper
Digimatic Micrometer
Digimatic Indicator
Digimatic connection cable
(option)
NOTICE Do not use the product in a dusty place. If used in a dusty place, it may cause failure due
to dust penetrating into the product.
Tips
• Pay attention to the connector directions when inserting. DP-1VA LOGGER side of
the connection cable shall be connected to ensure that the Mitutoyo logo mark on the
connector is facing up.
• The connector shall be removed/inserted straight in the connector to avoid excessive
burden to the product connector portion.