Mitutoyo DP-1VA LOGGER, Руководство пользователя

Страница: 29 / 99

13
2 Basic Operations
No. 99MAM029A
3
Fix the date.
1
Press
DATA
once.
» The fi xed date is printed.
» The explanation on key operation for
time setting, next settings "15 TIME"
and the time currently set are printed as
shown in the right fi gure.
Fixed date
Time currently set
Explanation on key
operation for time
setting
Tips
If the desired date is not printed, enter the parameter setup mode again to re-enter it.
4
Input the time. (If change is not required, go to
5
.)
1
Input "Hour" by pressing
PRINTER
the
necessary amount of times from the
current set value.
2
Input "Minute" by pressing
CLEAR
or
TOL.
REC/STOP
the necessary amount of times
from the current set value.
3
Check whether the printed time is the
intended one by pressing
STAT.
OUT LOG
.
4
When the desired time is not printed,
change it with procedure
1
or
2
.
POWER
TOL.
REC/STOP
PRINTER CLEAR
STAT.
OUT LOG
CANCEL
DATA FEED
Minute (0 -> 1
->
...
-> 59 -> 0)
Hour (0 -> 1 ->
...
-> 23 -> 0)
Minute (59 -> 58 ->
...
0 -> 59)
The time input is
printed
Tips
Set the time in the 24-hour system format.
5
Fix the time.
1
Press
DATA
once.
» The fi xed time is printed.
Fixed time
Tips
• If the desired time is not printed by pressing
DATA
, enter the parameter setup mode
again to re-enter it.
• Even if the power is turned off after this operation, the date and time set shall be main-
tained. However, when the parameters are cleared with "PARAMETER CLEAR" in the
parameter, the date and time is set as "2017/1/1 0:0" and resetting is required.
If it is desired to complete parameter setup after the above, press
DATA
repeatedly until
parameter setup list is printed.
POWER
TOL.
REC/STOP
PRINTER CLEAR
STAT.
OUT LOG
CANCEL
DATA FEED