Mitsubishi V19-V21, Техническое руководство

Страница: 8 / 71

1-4
2) One Recording allowed.
3) No Recordings allowed.
At present, only QAM (Digital Cable Signals) are coded
with 5C Copy Protection. When the V19 detects a
Copy Protected signal, that signal is not output at the
Monitor Outputs of the TV.
Monitor Output Sources
There are only two sources that output signals at the
Monitor Outputs, NTSC signals and signals from the
ATV Tuner (when not Copy Protected).
Timer Recording
Mitsubishi's HS-HD2000U and HS-HD1100U, D-
VCRs includes HDTV recording capability and HAVi.
However it must be connected to an external ATV Re-
ceiver with a IEEE-1394 interface, such as in the V19
chassis. Time Shift Recording allows recording from
the V19’s ATV Tuner without turning the TV On, only
the TV’s signal circuits are activated. The Time Shift
Recording time can be pre-programmed so the user does
not have to be present to activate the recording.
External Inputs & Outputs
Analog External Inputs and Outputs are located both
on the rear and front of the TV. Figure 1-3 shows the
External Analog Inputs and Outputs. The DTV Inputs