OPERATIONS INSIDE THE ENGINE COMPARTMENT
PERIODIC INSPECTION AND MAINTENANCE
2-33
4. Use an oil filter wrench to remove the fuel filter
cartridge from the fuel filter pump body.
5. Install a new filter, and bleed the air from fuel line.
<TYPE1>
(1) Remove the fuel filter air plug and O-ring.
(2) Cover the circumference of the air plug hole
with cloth and use a hand pump repeatedly
until no bubbles come out of the air plug hole.
(3) Replace the air plug and O-ring with a new
one. Tighten the air plug to the specified
torque.
Tightening torque: 5.0
±
1.0 N
⋅
m
(4) Repeat until the hand pump operation
becomes stiff.
6. Install a new filter, and bleed the air from fuel line.
<TYPE2>
(1) Connect the all fuel hose to the fuel filter,
and pump the hand pump until the hand pump
becomes stiff.
<Diesel powered vehicles with plastic
fuel filter case>
1. Remove the fuel tank cap to release the pressure
inside the fuel tank.
2. Remove the fuel filter protector B.
3. Loosen the drain plug to drain the fuel. Then.
tighten the drain plug.
Tightening torque: 0.6
±
0.2 N
⋅
m
4. Insert a flat-tipped screwdriver into the groove of
the fastener nut.
5. Loosen the fastener nut using the flat-tipped
screwdriver until it can be loosened by hand.
6. Remove the fuel filter plug and O-ring.
7. Install the fuel filter cap by aligning the marks on
the fuel filter cap and the fuel filter case.
8. Securely tighten the fastener nut until the mark is
in the position shown in the figure (until it clicks in
place).
AC502833AB
AC801806AB
Hand pump
Air plug
<TYPE1>
AC801807AB
Hand pump
Fuel feed
hose
Battery
<TYPE2>
ACB01912
Fastener
nut
AB
ACB01913
O P E N
ACB01914AB
Mark
Содержание Pajero Sport 2013
Страница 6: ...NOTES...
Страница 16: ...BODY PRE DELIVERY INSPECTION 1 10...
Страница 17: ...BODY PRE DELIVERY INSPECTION 1 11...