Mitsubishi MELSEC QJ71E71-100, Руководство пользователя

Страница: 16 / 20

8
6. Setting from GX Developer
Using GX Developer, please make parameter setting for "Network Parameters
Setting the number of Ethernet/CC IE/MELSECNET cards" ( 1) and "Ethernet
Operations".
Item Contents
Network parameters setting the
number of Ethernet/CC
IE/MELSECNET cards
Sets "Staring I/O No.", "Network No." and "Station
No." to use Ethernet module as Network module.
Ethernet operations
Sets "Communication data code", "IP address" and
"Initial timing" to perform initial processing of
Ethernet module.
Remarks
It is not necessary to set the "Intelligent function module switch settings" with GX Developer’s
I/O assignment.
Each type of setting corresponding to the switch settings is performed in the above
mentioned "Operational settings," "Initial settings," and "Open settings."