Mitsubishi MELSEC-A A1SJ71AS92, Руководство пользователя

Страница: 13 / 18

4
4. Part Identification Nomenclature
Indicates the name of each part of A1SJ71AS92.
No. Name Details
1) 17-segment LED The operation status of the A1SJ71AS92 is
displayed as a value.
2) LED display The operation status of the A1SJ71AS92 is shown
by turning ON or OFF.
This switch is used to change between the protected
operation mode and configuration mode.
RUN This turns ON when the A1SJ71AS92 is
running normally.
U ASI The AS-i circuit is sufficiently powered. This
LED refers to the AS-i line shown on digit 1.
3) MODE switch
ERR. Configuration error. This LED refers to the
AS-i line shown on digit 1.
4) SET switch This switch is used to set or delete the slave
address.
5) Terminal block This is connected to the AS-i system with an AS-i
cable.