Mitsubishi ME96SSR-MB, Руководство пользователя

Страница: 82 / 83

- 81 -
Specifications
5. Setting Table (Factory Settings and Customer Setting Note)
Setting menu No. Setting items Initial content Memo
1.1 Phase wire system 3P4(3-phase 4-wire)
1.2 Display pattern P04
1.2.1 Pattern P00 ―
1.3 VT/direct selection no(No VT)
1.3.1 Direct voltage 220/380V
1.3.2 VT secondary voltage ―
1.3.3 VT primary voltage ―
1.4 CT secondary current 5A
1.4.1 CT primary current 5A
1.5 Frequency 50Hz
1
1.7 Time constant for current demand 0s
2.1 Communication method selection (With ME-0040C-SS96) CC(CC-Link)
2.2 MODBUS
®
RTU address 1
2.2.1 MODBUS
®
RTU baud rate 19.2kbps
2.2.2 MODBUS
®
RTU parity EVEn(even)
2.2.3 MODBUS
®
RTU stop bit 1
2.3 CC-Link station number 1
2.3.1 CC-Link baud rate 156kbps
2.3.2 CC-Link version 1.10
2
2.4 Communication reset oFF
3.1 Current maximum scale 5A(CT primary current)
3.1.1 Special current maximum scale ―
3.2 Voltage maximum scale 300V(±0 STEP)
3.3 Power maximum scale 4000W(±0 STEP)
3.3.1 Single / Double deflection Single deflection
3.4 Reactive power maximum scale 4000var(±0 STEP)
3.5 Power factor scale 0.5 （ -0.5 to 1 to 0.5 ）
3.6 Expanded counting Combination I
3
3.7 Harmonics display oFF
4.1 Model name + option code (Model name)
4.2 Version display (Version)
4.3 Back light brightness 3
4.4 Back light auto off Auto(Auto off)
4
4.5 Display update time 0.5s
5.1 Alarm item 1 non
5.1.1 Alarm value 1 ―
5.2 Alarm item 2 non
5.2.1 Alarm value 2 ―
5.3 Alarm item 3 non
5.3.1 Alarm value 3 ―
5.4 Alarm item 4 non
5.4.1 Alarm value 4 ―
5.5 Alarm delay time ―
5.6 Alarm cancel method ―
5.7 Back light flickers during alarms ―
5.8 Motor start-up current masking oFF
5.8.1 Motor start-up current threshold ―
5.8.2 Motor start-up current delay time ―
5.9 Pulse / Alarm output 1 (With ME-4210-SS96) PULSE(Pulse output)
5.9.1 Pulse output 1: output item Wh
5.9.2 Pulse output 1: pulse unit 0.001kWh/pulse
5.10 Pulse / Alarm output 2 (With ME-4210-SS96) AL (Alarm output)
5.10.1 Pulse output 2: output item ―
5.10.2 Pulse output 2: pulse unit ―
5
5.11 Pulse width 0.125s
6.1 Analog output CH1: output item A
AVG
6.1.1 Detailed setting (1) 5A(CT primary current)
6.1.2 Detailed setting (2) ―
6.2 Analog output CH2: output item V
AVG
(L-N)
6.2.1 Detailed setting (1) 300V(±0 STEP)
6.2.2 Detailed setting (2) ―
6.3 Analog output CH3: output item Σ W
6.3.1 Detailed setting (1) 4000W(±0 STEP)
6.3.2 Detailed setting (2) Single deflection
6.4 Analog output CH4: output item Σ PF
6.4.1 Detailed setting (1) 0.5
（
-0.5 to 1 to 0.5
）
6.4.2 Detailed setting (2) ―
6
6.5 Analog output limit oFF
7.1 Periodic Active energy display oFF （ Not displayed ）
7.1.1 Control setting for switching time segments of periodic active energy non(Not switched)
7.3 Digital input/output status display oFF(Not displayed)
7
7.3.1 Digital input reset method Auto(Auto off)
8.1 Operating time display oFF
8.1.1 Target for counting Operation time setting AUX
（
Auxiliary power
）
8.1.2 Operating time threshold ―
8.2 Switch element information 123
8
8.3 Set IEC mode oFF （ Normal mode ）