Mitsubishi LANCER 2012 Скачать руководство пользователя страница 547

Страница: 547 / 722

5-130

Comfort controls

To listen to tracks from a device connected via
Bluetooth

N00765500034

1. Press the PWR button (2) to turn on the audio system. The

system turns on in the last mode used.

2. Press the CD button (1) several times to switch to the

B (Bluetooth

) mode. The input mode changes as follows

every time the CD button is pressed.
CD mode

→

USB (iPod) mode

→

Bluetooth

mode

NOTE

●

For vehicles equipped with audio/video input RCA termi-
nals, pressing and holding the CD button for 2 seconds or

more switches the system to the AUX mode.

3. Connect your Bluetooth

device.

Refer to “Connecting the Bluetooth

2.0 interface and

Bluetooth

device” on page 3-264.

4. Playback starts automatically.

NOTE

●

Depending on the connected device, the playback may not
start automatically.
In this case, operate the connected device to start the play-

back.

To stop the playback (if supported by the device)

N00765600019

To stop the playback, press the DISC DOWN button (7).

To restart the playback, press the DISC UP button (8).

To pause the playback (if supported by the device)

N00765700010

To pause the playback, press the DISC DOWN button (7).
To restart the playback, press the DISC UP button (8).

To select a track (if supported by the device)

N00765800011

Press the TRACK button (10) to select the desired track num-
ber.

If the

side of the button is pressed once while a track is

playing, playback returns to the start of that track.

NOTE

●

Every time the track selection button is pressed, the track

number in the display changes.

To play the same track repeatedly (if supported by the

device)

N00765900012

Press the RPT button (5) during playback to show “RPT” in the

display.
To exit this mode, press the button again.

Press

: The track number increases by one.

Press

: The track number decreases by one.

Press

for a long

period (approx. 2

seconds or more)

: The track number increases continu-

ously while the button is pressed.

Press

for a long

period (approx. 2
seconds or more)

: The track number decreases continu-

ously while the button is pressed.

BK0138600US.book 130

ページ

２０１１年７月１７日　日曜日　午後２時３２分

Содержание LANCER 2012



















































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание LANCER 2012

Отзывы:

Бренды по названию

Популярные бренды

Mitsubishi LANCER 2012, Руководство пользователя

Результаты поиска

Содержание LANCER 2012

Отзывы:

Бренды по названию

Популярные бренды