Mitsubishi LANCER 2012 Скачать руководство пользователя страница 516

Страница: 516 / 722

Comfort controls

5-99

7. “STORED” will be displayed for 2 seconds, the code will

be changed and the satellite radio will return to the LOCK
setting mode.

NOTE

●

The SKIP settings, LOCK settings and lock cancellation
code are stored in memory. Disconnecting the battery
cable will erase these settings.

(The lock cancellation code will reset to the default fac-
tory setting: “1111.”)

To reset the lock cancellation code

In case you forget the code, it is possible to reset the code to the

factory setting (1111).

1. With the audio power OFF, press the PWR switch (2) and

the TUNE/SOUND switch (7) at the same time.

The display will show “CODE INITIAL.”

2. Press the TUNE/SOUND switch (7). “YES” will be dis-

played. To reset the code, press the TUNE/SOUND
switch (7) again. “STORED” will be shown for 2 seconds

and the code will be reset.
If you do not want to reset the code, turn the
TUNE/SOUND switch (7) to display “CANCEL” and

then press the TUNE/SOUND switch (7) again.

Text message

You can change what is shown on the display when the satellite

radio tunes into a channel.
Press the DISP button (4) repeatedly to change to your desired
display mode. The order is: Channel Channel Name

→

Category Name

→

Artist Name

→

Song Title

→

Composer

Name

NOTE

●

Category name can also displayed by pressing the PTY
button (8).

●

The display can show up to 12 characters. If there are

more than 12 characters, press the PAGE button (3) to
view the next 12 characters.

BK0138600US.book 99

ページ

２０１１年７月１７日　日曜日　午後２時３２分

Содержание LANCER 2012



















































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание LANCER 2012

Отзывы:

Бренды по названию

Популярные бренды

Mitsubishi LANCER 2012, Руководство пользователя

Результаты поиска

Содержание LANCER 2012

Отзывы:

Бренды по названию

Популярные бренды