Mitsubishi LANCER 2012 страница 190 Скачать руководство пользователя

Страница: 190 / 722

Features and controls

3-95

To start

Press the clutch pedal all the way down and shift into 1st or
“R” (Reverse) position. Then gradually release the clutch pedal

while depressing the accelerator pedal.

NOTE

●

If it is hard to shift into 1st, depress the clutch pedal a sec-

ond time; the shift will then be easier.

●

To shift into reverse from 5th gear, move the gearshift
lever to the “N” (Neutral) position, and then shift it into

reverse.

Proper shift points

N00537400049

Always use care to change the gear with the vehicle speed

matched to the engine speed. Proper shifting will improve fuel
economy and prolong engine life.

CAUTION

●

Do not move the gearshift lever into reverse while
the vehicle is moving forward; doing so will damage
the transaxle.

●

Do not rest your foot on the clutch pedal because
this will cause premature clutch wear or damage.

●

Do not coast in the “N” (Neutral) position (illegal in

many states).

●

Do not use the gearshift lever as a handrest, because
this can result in premature wear of the transaxle

shift forks.

CAUTION

●

Avoid downshifting that may cause the tachometer
pointer to enter the red zone.

This puts the engine at risk of being damaged.

BK0138600US.book 95

ページ

２０１１年７月１７日　日曜日　午後２時３２分

Содержание LANCER 2012



















































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание LANCER 2012

Отзывы:

Похожие инструкции для LANCER 2012

Бренды по названию

Популярные бренды

Mitsubishi LANCER 2012, Руководство пользователя

Результаты поиска

Содержание LANCER 2012

Отзывы:

Похожие инструкции для LANCER 2012

Бренды по названию

Популярные бренды