FX Series Computer Link Driver
GP-Pro EX Device/PLC Connection Manual
2
Introduction
This manual describes how to connect Display and External Device (target PLC).
In this manual, the connection procedure will be described by following the below sections:
1
System Configuration
This section shows the types of External
Device which can be connected and SIO
type.
)
"1 System Configuration" (page 3)
2
Selection of External Device
Select a model (series) of the External
Device to be connected and connection
method
)
"2 Selection of External Device" (page 7)
3
Example of Communication Settings
This section shows setting examples for
communicating between the display and
the External Device.
)
"3 Example of Communication Setting"
(page 8)
4
Setup Items
This section describes communication
setup items on the display.
Set communication settings of Display
with GP-Pro Ex or in off-line mode.
)
"4 Setup Items" (page 15)
5
)
"5 Cable Diagram" (page 20)
Operation
Cable Diagram
This section shows cables and adapters
for connecting the display and the External
Device.
