18
Your company internal use only.
Copyright (C) Mitsubishi Electric Corporation.
DY-5MU4R69-T-3,4
DISASSEMBLING PROCEDURES
●
Disassembling procedures
In reverse of assembling procedures.
●
Assembling procedures
1. Bending the FPC of M023. (Reference to the Fig.J.)
2. Stick TAPE-POLYESTER to M023. (Reference to the Fig.H and Fig.K.)
3. Stick M017 (2 places) and M018 (2 places) to M023, after remove the protection sheet of M023.
When attach M017 and M018, carry the ends of release paper of M017 and M018.
Refer to the figure on the right and below.
*Stick M017 and M018 so as not cover glass of M023 and not stick form of M023.
4. After attach, remove the release paper of M017 and M018.
M023 : ASSY-LCD
M023 :
ASSY-LCD
M017 : SHEET-TP
M017 : SHEET-TP
M018 : SHEET-TP
FPC
M023
M023
M023
M023
Bending point of the FPC.
TAPE-POLYESTER
TAPE-
POLYESTER