14
Your company internal use only.
Copyright (C) Mitsubishi Electric Corporation.
DY-5MU4R69-T-3,4
DISASSEMBLING PROCEDURES
M022
Rearranging point of M022
Ⓒ
x 2
No.
Screw
Tighten torque(N
・
m)
Ⓒ
2.6X6
0.4
±
0.1
Ⓒ
x 2
M001 : FLAT-CABLE 10P
S3-LCD
S3-LCD
M022.
ASSY-PANEL
M022 : ASSY-PANE
●
Disassembling procedures
In reverse of assembling procedures.
●
Assembling procedures
1. Insert M022 between locating rib on ASSY-PANEL. *Refer to the Fig.A.
2. After inserting locating hole B on S3-LCD into locating pin B on ASSY-PANEL and snap on.
3. After inserting locating hole A on S3-LCD into locating pin A on ASSY-PANEL and screw with
Ⓒ
. (4 places)
*Be careful not to roll up the FPC of M022 then.
4. Certainly fasten FPC on M022, after insert FPC on M022 into connector on S3-LCD.
*Refer to the Fig.B.
5. Certainly fasten M001, after insert M001 into connector on ASSY-PANEL and S3-LCD.
Detail of M022 assembly work
M022.
*FPC at the position same as a detailed drawing.
(The right side of the bottom center.)