
16
Your company internal use only.
Copyright (C) Mitsubishi Electric Corporation.
DY-5MU4R69-T-3,4
DISASSEMBLING PROCEDURES
●
Disassembling procedures
In reverse of assembling procedures.
●
Assembling procedures
1. Bend FPC-1 of HOLDER-LCD-RE. *Refer to lower figure.
2. After inserting locating hole on M028 into locating pin on HOLDER-LCD-RE (2 places) and screw with
Ⓔ
. (6 places)
3. Insert FPC-1 into connector on M028 and certainly fasten connector of M028.
4. Insert FPC-2 into connector on M028 and certainly fasten connector of M028.
Ⓔ
x 6
No.
Screw
Tighten torque(N
・
m)
Ⓔ
2.6X6
0.5 +0.2/-0.1
HOLDER-LCD-RE
M028 : ASSY-PCB-MONI-T