manualshive.com logo in svg

Mitsubishi CP910E, Руководство по эксплуатации, Страница: 46 / 50

Поделиться
Скачать
Mitsubishi CP910E Скачать руководство пользователя страница 46

46

Symptom

Check and Remedy

ERROR MESSAGES & COUNTERMEASURES

When inputting monochrome image signal

Is INPUT in ANALOG COLOR ADJ set to “COLOR”?

(without burst signal), sync. becomes unstable.

→

Set INPUT to “COLOR”. Refer to page 40.

The colour or picture quality is different between Is the image on the monitor screen adjusted?

the image on the monitor screen and the

→

Adjust the image on the monitor screen with “MONI R-SUB” and “MONI B-

printed image. (When the colour and picture

SUB” in the OUTPUT menu.

quality are same between the image stored in

Refer to page 41.

the memory and the printed image.)

The set comments do not appear on the

Is the COMMENT set to “OFF”?

 print paper.

→ 

Set COMMENT to “ON”. Refer to page 35.

Is the comment inputted?

→

 Input the comment on the menu. Refer to pages 35-36.

Wired remote control unit cannot be operated.

Is the plug of the remote control unit disconnected from its terminal on the

unit?

→

Connect the plug of the remote control unit to the REMOTE terminal on

the unit.

Is the wired remote control unit for this unit (accessory) used?

→

Use the remote control unit for this unit.

Is PAPER HOLD set to “ON”, and is printed paper kept at the print outlet?

→

Remove the printed paper from the print outlet.

Is the KEY LOCK set to ON?

→

Set the KEY LOCK to OFF.

Содержание CP910E



















































Отзывы:

Нет отзывов